as standard
as standard
Brand: Peco Part Number: PL-80 Scale / Type: HO / OO Scales Our Code: PEPL-80 These new Power Feed Joiners will help address the worrie...
View full detailsBrand: Peco Part Number: PL-11 Scale / Type: HO / OO Scales Our Code: PL-11 Side mounted turnout motor. Designed to clip into the side ...
View full detailsThese new Power Feed Joiners will help address the worries of soldering that many modellers' have: they're the safe, clean and tidy way of bringing...
View full details18 strand cable ideal for wiring model Railways & similar applications:Rated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm
Brand: Peco Part Number: PL-13 Scale / Type: N / HO / OO / O Scales Our Code: PL-13 simple, inexpensive switch easily fitted underneath...
View full details18 strand cable. ideal for Model Railway layout wiring & similar applications:Rated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm
Provides the short burst of current needed to operate the PL-10 Turnout Motor. May be ganged using the Joining Bar PL-24
Decoder Wire - Stranded 6m (32g) Black. 6 metres (enough for 50+ installations) of Black Stranded 32 gauge Decoder wire.
Momentary action - toggle springs back to centre (off) position when released.Ideal for operating solenoid motors, such as point motors used on mod...
View full detailsBrand: Peco Part Number: ST-9 Scale / Type: N Scale Our Code: ST-9 PECO Setrack N Gauge Code 80 - Unit trackage System The high quality r...
View full detailsPlug Together 12 Way Connector Block Set. Rated 6amp Easily cut to required number.
These new Power Feed Joiners will help address the worries of soldering that many modellers' have: they're the safe, clean and tidy way of bringing...
View full detailsBrand: Hornby Part Number: R8232 Scale / Type: OO Scale To adapt Hornby points for use with DCC Systems
Brand: Gaugemaster Part Number: GM56 Scale / Type: HO / OO Scales For modellers who already have their own buffer stops and are busy popula...
View full detailsPack of 5 SPST Miniature switches. 2 positons: ON/OFF (H 9 x W 13 x D 7mm) Hole required: 6.35mm Rated: 5A/28v DC
Brand: Peco Part Number: PL-26Y Scale / Type: N / HO / OO / O Scales Our Code: PL-26Y Provides a short burst of currents neede to opera...
View full detailsCode 100 Set Track Power Clip
Heat Shrink Black (36 Pack)Fine heat shrink is essential for decoder installations. There is enough in one pack for well over 150 joints.
If using LEDs for any other application on the layout that doesn't involve SmartSwitch, then these resistors should be connected to each LED (the l...
View full detailsBrand: Peco Part Number: PL-27 Scale / Type: N / HO / OO / O Scales Our Code: PL-27 Six-bay panel for use with the Peco clip-in switch...
View full detailsBrand: Peco Part Number: PL-26W Scale / Type: N / HO / OO / O Scales Our Code: PL-26W Provides a short burst of currents needed to oper...
View full detailsDecoder Wire - Stranded 6m (32g) Red. 6 metres (enough for 50+ installations) of Red Stranded 32 gauge Decoder wire.
5 x Small Type 3Amp 12 Way Connector Blocks
Power Clip and Connector for Bachmann EZ Command Controller